Ji'nan double arm welding fume purifier dual-purpose
The working principle of welding fume purifier:
The welding fume purifier has a four stage filtration level and removes the weld smoke in full depth. First of all through the universal welding fume suction arm into the first layer of air balance board equipment, avoid air pollutants to focus only on a filter range of uniform distribution, at the same time to intercept the spark, sent to prevent fire, then gas into second layers -- pre filter, primary filter pollution gas, smoke gas after the pre service life of the filter element; the filter into the third layer core filter cartridge filter, the filtration efficiency is 99%, the vast majority of welding fume purification; finally post filter, the purified gas can enter the breathing zone, recycling, energy saving and environmental protection.
Applicable industries / applications: cutting, grinding, welding, mixing and other dust producing conditions;
Sunyata welding smoke purifier with high-efficiency filtration tube as the filtering element, the selection of the filter cartridge filter is different from the traditional filter material, its surface with a layer of Teflon film. The traditional filter material (such as cotton, cotton, paper and other traditional cellulose fiber) clearance is 5 ~ 60um, when by smoke, smoke is a part of the dust particles will enter the internal filter blocking filter element; when the congestion effectively cleaning gradually worsened when no air resistance filter element will rise gas flow through, would fall. If there is no dust, the filtering effect will decline rapidly, and the series of the purifier filter surface with a layer of Teflon film, the minimum mesh can block most of the sub micron particle; sub micron dust particles in the filter surface aggregation and the formation of a dust layer permeable, most of the dust particles in the filter is blocked outside the surface can not enter the internal filter, the compressed air blowing can be cleared in a timely and effective manner. The filter medium has a high filtration efficiency, at least 3~5 times higher than the traditional filter medium, and the service life is increased by more than 2 times compared with the traditional filter medium.
Product features
1 、 filter barrel filtration, large filtration area, long filter drum replacement cycle, high filtration efficiency, low cost of replacement.
2, products with small size, with brakes, can be easily moved in different workplaces.
3. The flexible suction arm is easy to pull and extend, can rotate at 360 degrees, hover arbitrarily, and increase the cleaning area.
4, built-in smoke filter cycle way, avoid indoor air conditioning / heating platoon outdoor.
5, small power, low energy consumption.
6 、 low noise design.
Structure composition
The manual cleaning of main parts include: universal vacuum suction hose, high temperature resistant, arm suction hood (with the valve), fire resistance, polyester film, filter, clean room, fire-retardant sound-absorbing cotton, with brake casters, a new Korean fan, motor and electric control box etc..
Automatic cleaning of main components include: universal vacuum arm, high-temperature vacuum hose, suction hood (with the valve), fire resistance, guide plate, polyester film, filter, dust collecting drawer, pulse control instrument, pulse valve, pressure gauge, clean room, fire-retardant sound-absorbing cotton, with new Korean brake casters, fan, motor and electric control box etc.
SYD smoke cleaning machine adopts imported high wind pressure and low noise blower, which can absorb smoke and dust particles effectively and prolong the service life of filter core to the maximum extent. Its control system adopts PWM speed regulation, which can realize the continuous and precise regulation of air volume according to the amount of smoke and dust generated
The control system designed the light warning device. When the filter core is blocked, the red indicator light is on, which indicates the replacement of the filter core. The purifier filtration system by pre filter layer, filtering layer and gas filter layer is composed of three parts, the pre filter layer to particles of relatively large adsorption flow to avoid premature main filter layer is blocked; the main filter layer is composed of HEPA high efficiency filter core, high filtration efficiency of filter HEPA over 0.3 micron particles the 99.99%, the gas filter layer is composed of chemical element, can remove harmful gas flow effectively. Mainly used in laser processing, welding fume at