Jurong pipeline gas filter, Feng Feng, manufacturing quality
Price |
59800 |
Unit |
台 |
Yield |
500/年 |
Place of Production |
河北衡水 |
Product Category |
石油化工类(换热器、容器、塔器等) |
Delivery Time |
20天 |
|
Product Detail Parameters
进口压力 |
0.4MPa | 出口压力 |
2-3KPa |
流量 |
500方 |
Product Description
Jurong pipeline gas filter, Feng Feng manufacturing, high quality
Maintenance
1 、 filter cleaning and maintenance operations
1.1 preparation
(1) the cleaning and maintenance operations can be carried out before applying for approval to the control center or relevant leaders before cleaning and maintenance.
(2) prepare safety warning board, combustible gas detector, isolation warning belt and so on.
(3) check the surrounding area of the filter and sewage tank, and put an end to all fire sources.
(4) check and verify the liquid level of the blowdown tank.
(5) prepare related tools.
1.2 maintenance operation
(1) close filter, inlet and outlet ball valve and differential pressure gauge.
(2) open the filter vent valve to reduce the pressure to about 0.2Mpa, drain the dirt in the filter according to the sewage operation rules, and then release the pressure in the filter until the pressure gauge reading is zero;
(3) unscrew the filter, open the blind plate nut to see if the gas is leaking, if not leak, then open the blind plate, remove the surrounding O ring.
(4) to filter from torsion, the tube plate removal filter, remove the filter on the stolen goods, use the cloth to clean the shell surface dirt cleaning, check all parts of the filter shell, especially shell type O ring and O ring filter, and see if there is any damage or excessive wear, corrosion, and more for the damaged or worn parts.
(5) install the filter core and other components, especially pay attention to check whether the sealing ring of the filter element is close to the sealing surface of the filter element, and ensure that the inner end of the filter core is sealed reliably, and no gas short circuit appears.
(6) carefully inspect the internal components of the filter to make sure the components are complete and properly installed.
(7) cover the blind lid quickly, secure the bolt and tighten the nut, and close the drain valve.
(8) open the upstream valve of the filter, replace the filter, replace the air and check if it leaks
Run Feng official website: www.hsrf0318.com
Contact: Tan Zheng, 180-0338-3735, plus WeChat, quote anytime, QQ:289424295
Product Performance
我厂可提供燃气调压方案,燃气调压柜,燃气调压箱,落地式调压柜,沼气减压阀,燃气壁挂炉专用调压柜,过滤器,加臭机,窑炉调压设备,炉窑燃气减压阀,燃气调压阀组、锅炉用燃气调压箱,小流量燃气调压装置、燃气小区入户调压设备,LNG调压撬,家用燃气热水器减压阀,家用燃气灶减压阀。