Ludian RX800 gas regulator cabinet Feng Feng manufacturing
Operating procedures for filters
1, check the filter inlet, outlet, drain valve is normal.
2. Understand and grasp the performance, principle and function of the filter.
3, first close the drain valve, open the filter outlet valve, and then open the inlet valve.
4. The pressure difference of the filter should be observed at any time.
5, control the filter work pressure is lower than the design pressure, prevent overpressure caused unexpected situation.
6, sewage should be stable and slow, the sewage valve should not suddenly open, to ensure smooth pipeline pressure, to avoid damage to the valve.
7, check and regular sewage, prevent dirt into saving too much gas pipeline.
8, shutdown, first turn off the inlet valve, then close the outlet valve, and finally open the drain valve.
9. Make sure the filter is clean.
10 、 regular maintenance and maintenance of the filter.
Under certain pressure, the gas enters into the filter, the larger solid particles in general linear motion, smaller particles will be free movement, filter using screen, stop, stop three ways to capture these particles, the filter material molecular attraction draws liquid, and coalesce into larger droplets, the liquid drop attracted to the fiber, the filter becomes wet, filter fiber more and more space is filled with liquid and solid particles, liquid drops into the separation chamber, the mist catcher catch out of gas.
Run Feng official website: www.hsrf0318.com
Contact: Tan Zheng, 180-0338-3735, plus WeChat, quote anytime, QQ:289424295