Equipment advantage
1 、 electronic control adopts overcurrent overload protection device. The structure is simple, safe and easy to operate;
2, advanced fan design, large air flow, low power consumption;
3, PTFE filter (filter effect > 99.9%), long life (30 thousand hours); this filter is imported from the United States can effectively purify the dust particles of 0.3 micron, two indoor exhaust air to reach the national emission standards, prevent fine dust particles on workers damage; get rid of many domestic industries (the filter which can reach the precision filter).
4, the use of universal suction arm 360 degrees (the outer wall of the hose for the activities of the Taiwan imported PVC elastic steel wire of high temperature resistance, corrosion resistance; welding dust generated by corrosive, high temperature and certain welding sparks generated can reach 1000 degrees, different from the domestic hose), can be sucked from the flue gas the flue gas, greatly improve the dust collection rate;
Fire resistance 5, a special internal purifier for larger particles of slag has a longer lifetime, cleaner more safe and reliable.
6. Clean air is evenly guided and dispersed from the grille like air outlet, and special noise proof cotton is built in the casing to reduce noise.
7, with a dedicated brake casters, so as to facilitate the movement of equipment and Ding bit.
Purification principle
Dirty air through the flexible suction arm is sucked into the purifier; large particles in the air is dirty built-in filter cartridge (first layer purification); most of the debris left HEPA filter cartridge; clean air through the filter to external cartridge, re purification; clean air purifier is discharged from the bottom cycle to the workshop. A good welding smoke purifier is not only the structure conforms to the airflow kinematics, the filter material uses the imported nanometer filter material to realize the dust removal, and the more is the detail value of each aspect. In the role of environmental protection exhaust centrifugal fan, air through the dust from the air inlet pipe into the dust filter, air flow rate decreased rapidly, large particles, heavy particles after collision, residue, spark by gravity sink set to set the ash bucket, tiny dust into the main filter chamber filter tube with the airflow is blocked in the the outer surface of the filter cylinder, clean air into the clean room, after silencing after being discharged from the air outlet.
The cleaning methods can be divided into manual cleaning and pulse cleaning
Pulse cleaning: when the cartridge pressure difference reaches the set value, the electromagnetic pulse valve automatically opens, air bag gas blowing through the nozzle to filter the inner wall of the cylinder, blowing on the filter cylinder instantaneous spray in the non-stop state, cleaning after the pressure becomes small, continue to maintain the normal working state of dust collector