Intelligent electric actuator F-DZW120 Yang repair type factory direct sales;
F-DZW series multi turn electric actuator is the driving device for valves to be opened, closed or regulated. Z electric actuator is suitable for gate valve, stop valve, diaphragm valve, plunger valve, throttle valve, sluice gate, etc.. It can be used for open rod valve, and also for dark rod valve.
This series of electric actuator has the features of full function, reliable performance, advanced control system, small size, light weight, convenient maintenance and so on. Can implement remote control, centralized control and automatic control of valve. It is widely used in electric power, metallurgy, petroleum, chemical industry, paper making, sewage treatment and other industries.
The main models are: F-DZW10, F-DZW20, F-DZW30, F-DZW45, F-DZW60, F-DZW90, F-DZW120, F-DZW180, F-DZW250, F-DZW350, F-DZW500;
Main function:
F-DZW series non intrusive intelligent electric actuator
1, all Chinese show: the actuator window uses high-definition LCD digital, full Chinese and identifier LCD display.
2, phase sequence automatic correction: the actuator rotation direction can be set freely, also can adjust the power supply phase sequence freely.
3 、 phase lack protection: it has the function of power supply missing phase and output phase lack protection.
4, non intrusive: local operating device using non-contact induction components, on-site debugging without opening the cover.
5, man-machine interface: the use of high-definition, high contrast LCD display, containing background lights, all Chinese, user-friendly settings and debugging.
6 、 remote control: infrared remote controller can be used for debugging, operation or parameter setting and inquiry of the special installation position of the actuator.
7, accurate positioning: accurate valve positioning, the use of digital sensors to accurately detect the position of the valve.
8, control mode: conventional remote control signal using 4~20mA analog signal control, providing 4~20mA signal feedback (can provide a special amount of control). The remote control signal and the feedback signal are electrically isolated from the internal.
9, signal free configuration: the maximum output of 6 road contact signal workers choose to use, each signal can be defined freely.
10, self diagnosis: powerful fault self diagnosis function, convenient and timely handling of faults.
11, bus technology: with Profibus, Modbus and industrial Ethernet and other bus communication module.
12 、 remote diagnosis: online remote diagnosis function.
Technical condition:
The ambient temperature from-20 DEG C ~ 60
The environmental humidity is less than or equal to 95% (25 C)
Protection grade IP55, IP65 (special order)
Torque repeatability is less than or equal to 7%
Repeat position deviation is not greater than 5 degrees
Main electrical parameters
Power supply three-phase 380V AC + 10% 50Hz
Connector terminal type 24 core 6 core
Contact 500VAC/DC 16A 600VAC/DC 35A
The wire section 2.5mm2 6mm2
The input / output signal is input to the external / internal power supply
Current voltage 24VDC + 10% = 10mA
Pulse width: > 100ms
Photoelectric isolation
Switch output and output mode: passive contact 4 way
Capacity: 125VAC/30VDC 5A
Position feedback output range: 4 ~ 20mA
Load capacity: less than or equal to 750.
Linearity: less than 0.3