Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:1215040622 Q
1, unique dual shaft design, independent cutting blade and gasket installed in the two parallel rotation axis, alternating overlap, spiral cutting, cutting effect is excellent. The blade and the gasket are made of alloy steel, which is uniform, high strength and high efficiency.
2, blade unique design, can crush rigid and flexible material. The motor is driven by a motor speed reducer to rotate, and the strong squeezing force and the shear force are generated. Low speed operation torque is big, the effect is good.
3, mechanical seal and framework oil seal assembly, no need to seal flush, adjust, easy to use and maintenance.
4, different amount of water, pipe type crusher head loss is small, circulation efficiency is good, the water flow is smooth.
5, when a blockage occurs, the control cabinet will issue instructions to the mill, the blade automatically reverses, the obstacle to withdraw from the re grinding, to achieve intelligent management, to meet the requirements of unattended.
6, the use of different gear configuration modular design, to meet the special requirements of users.
The best cutting ability
A rear tipping type blade shaft arranged on the sludge cutting machine according to the sewage inflow angle. This design can capture any discharge. If you need to re - process, you can let the object fall into the inside of the blade. Blade group of different speeds can be torn fiber material, cutting edge of the knife.
Edges can be cut into pieces of plastic. The peripheral surface of the blade can also crush the brittle object.
Structure and working process
The sludge cutting machine is mainly composed of the driving parts, the driving shaft, the driven shaft and the milling cutter. Sludge cutting machine driving device drives the driving shaft to rotate, while the drive shaft drives the driven shaft through the precision gear drive, which are fixed on the cutter shafts are reverse rotation, and the solid extrusion cutting bit
Structure characteristics
- sludge cutting machine reducer and motor using shaft mounted gear helical gear reducer, the sludge cutting machine has the advantages of compact structure, convenient installation and maintenance.
L sludge cutting machine drive shaft and the driven shaft speed is not the same, so that between the slag and the self-cleaning cutter.
The cutter is left and right spiral spiral - sludge cutting machine, a driving shaft and a driven shaft and then press the left and right spiral spiral arrangement, in order to reduce the cutting force, improve the transmission stability of sludge cutting machine.
- sludge cutting machine bearing part sealed, so as to ensure the normal operation of the bearing
The cutting blade and gasket - independent
With high - strength alloy steel cutting blade and gasket, surface grinding and uniform hardening to the minimum 45-50HRC.
- cutting blade. Between the gasket and the axial gap is less than 0.65mm, to ensure the normal driving of the cutting blade, reduce wear, and increase the pressure pad.
L to ensure that the particle size of the blade tip height should not exceed 13 mm root diameter.
- sludge cutting machine shaft, a drive shaft and a drive shaft is made of high strength alloy steel, Quenched and tempered, meet the strength requirements.
Main technical parameters and dimensions
Model
Main specification (mm)
Motor power (kw)
Production capacity (M3N)
Import and export specification (mm)
Exterior dimension (mm)
purpose
Pump machine protection: in the current running pump and standby pump before the installation of a single sludge cutting machine, clean solid debris to prevent clogging, and help to maintain the best efficacy of the pump machine.
Sludge for milling of sludge in a sewage treatment plant sludge entrained cutting machine. The efficiency of sludge decomposition device can be improved after sludge milling.
Industrial waste water: many industrial areas need to carry out wet fluid grinding operations. From poultry manure to drilling debris generated from the oil drilling platform, the sludge cutting machine can be used to carry out the degradation process and protect the processing equipment.
Practice has proved that our sludge cutting machine for many customers previously considered to be unable to solve the problem of providing the most cost-effective solution.
L protect is prone to clogging submersible sewage pump or dry installation
L need small cutting sewage treatment plant water diversion canal economic solutions
- before the treatment of gate slag effectively cutting
- a number of small pieces of sludge, and can improve the treatment efficiency of digestion workshop
The industrial production of sludge treatment facility
Sludge cutting machine is designed to deal with the sewage and sludge produced in the modern society. Can handle all kinds of waste into the community, industrial waste water collection stations and sewage treatment system. Strong cutting force and energy saving
- run - biaxial at different speed increase of solid tearing ability.
Low - speed (typical speed 50-80rpm) can produce high torque.
Low - speed circular blade to ensure energy waste in water loss, while the abrasive wear rate of the minimum.
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:121504062 Q