Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:1215040622 Q
Tumbril special sludge cutting machine selection, PG type sludge cutting machine model
purpose
Pump machine protection: in the current running pump and standby pump before the installation of a single sludge cutting machine, clean solid debris to prevent clogging, and help to maintain the best efficacy of the pump machine.
Sludge for milling of sludge in a sewage treatment plant sludge entrained cutting machine. The efficiency of sludge decomposition device can be improved after sludge milling.
Industrial waste water: many industrial areas need to carry out wet fluid grinding operations. From poultry manure to drilling debris generated from the oil drilling platform, the sludge cutting machine can be used to carry out the degradation process and protect the processing equipment.
Again and again, the practice has proved that our sludge cutting machine provides the most economical and effective solution for many customers previously thought to be unable to solve the problem.
L protect is prone to clogging submersible sewage pump or dry installation
- small sewage treatment plant water diversion canal economy broken demand solutions
- effectively crushing gate slag before processing
- a number of small pieces of sludge, and can improve the treatment efficiency of digestion workshop
The industrial production of sludge treatment facility
Sludge cutting machine is designed to deal with the sewage and sludge produced in the modern society. Can handle all kinds of waste into the community, industrial waste water collection stations and sewage treatment system.
Crushing power and saving energy
- run - biaxial at different speed increase of solid tearing ability.
Low - speed (typical speed 50-80rpm) can produce high torque.
Low - speed circular blade to ensure energy waste in water loss, while the abrasive wear rate of the minimum.
Tumbril special sludge cutting machine selection, PG type sludge cutting machine model
The best crushing capacity
A rear tipping type blade shaft arranged on the sludge cutting machine according to the sewage inflow angle. This design can capture any discharge. If you need to re - process, you can let the object fall into the inside of the blade. Blade group of different speeds can be torn fiber material, cutting edge and the edge of the knife edge can be cut into pieces of plastic. The peripheral surface of the blade can also crush the brittle object.
Structure and working process
The sludge cutting machine is mainly composed of the driving parts, the driving shaft, the driven shaft and the milling cutter. Sludge cutting machine driving device drives the driving shaft to rotate, while the drive shaft drives the driven shaft through the precision gear drive, which are fixed on the cutter shafts are reverse rotation, and the solid crushing bite
Structure characteristics
- sludge cutting machine reducer and motor using shaft mounted gear helical gear reducer, the sludge cutting machine has the advantages of compact structure, convenient installation and maintenance.
L sludge cutting machine drive shaft and the driven shaft speed is not the same, so that between the slag and the self-cleaning cutter.
The cutter is left and right spiral spiral - sludge cutting machine, a driving shaft and a driven shaft and then press the left and right spiral spiral arrangement, in order to reduce crushing force, improve the transmission stability of sludge cutting machine.
- sludge cutting machine bearing part sealed, so as to ensure the normal operation of the bearing
The cutting blade and gasket - independent
With high - strength alloy steel cutting blade and gasket, surface grinding and uniform hardening to the minimum 45-50HRC.
- cutting blade. Between the gasket and the axial gap is less than 0.65mm, to ensure the normal driving of the cutting blade, reduce wear, and increase the pressure pad.
L to ensure that the particle size of the blade tip height should not exceed 13 mm root diameter.
- sludge cutting machine shaft, a drive shaft and a drive shaft is made of high strength alloy steel, Quenched and tempered, meet the strength requirements.
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:121504062 Q