Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:1215040622 Q
purpose
Pump machine protection: in the current running pump and standby pump before the installation of a single body crusher, purification of solid debris, to prevent clogging, and help to maintain the best efficacy of the pump.
Sludge crusher for milling wastewater sludge entrained. The efficiency of sludge decomposition device can be improved after sludge milling.
Industrial waste water: many industrial areas need to carry out wet fluid grinding operations. From the poultry manure to the drilling platform of the oil drilling platform, can be used to deal with the drilling debris, the protection of process equipment.
Model
PG-10
PG-12
PG-15
PG-20
PG-25
PG-30
Again and again, the practice proves that our crusher provides the most economical and effective solution to many customers previously thought to be unable to solve the problem.
L protect is prone to clogging submersible sewage pump or dry installation
- small sewage treatment plant water diversion canal economy broken demand solutions
- effectively crushing gate slag before processing
- a number of small pieces of sludge, and can improve the treatment efficiency of digestion workshop
The industrial production of sludge treatment facility
The crusher is designed to deal with the sewage and sludge produced in the modern society. Can handle all kinds of waste into the community, industrial waste water collection stations and sewage treatment system.
principle
Our crusher series is made up of a series of low speed, high torque crusher.
Each shaft is equipped with a series of staggered blade and spacers, provide "variable volume" real solid and broken, once the object into the low-speed rotating blade group in Molugetao - rag. Rope. Plastic. Beverage cans. Pantihose, wood and various rubber products can be an easy job to do crusher.
Crushing power and saving energy
- run - biaxial at different speed increase of solid tearing ability.
Low - speed (typical speed 50-80rpm) can produce high torque.
Low - speed circular blade to ensure energy waste in water loss, while the abrasive wear rate of the minimum.
L have a number of patented.
The best crushing capacity
A rear tipping type blade shaft arranged on the crusher according to the sewage flow angle. This design can capture any discharge. If you need to re - process, you can let the object fall into the inside of the blade. Blade group of different speeds can be torn fiber material, cutting edge and the edge of the knife edge can be cut into pieces of plastic. The peripheral surface of the blade can also crush the brittle object.
Structure and working process
The crusher is mainly composed of the driving parts, the active shaft, the driven shaft, the milling cutter, the seal, and so on. The driving device drives the driving shaft to rotate and drive shaft by crushing machine, precision gear drives the driven shaft, which are fixed on the cutter shafts are reverse rotation, and the solid crushing bite
.
Structure characteristics
- crusher reducer and motor using shaft mounted gear helical gear reducer, the crusher has the advantages of compact structure, convenient installation and maintenance.
- crusher drive shaft and the driven shaft speed is not the same, so that between the slag and the self-cleaning cutter.
Machine cutter with left and right spiral spiral broken - loaded, the driving shaft and the driven shaft and then press the left and right spiral spiral arrangement, in order to reduce crushing force, improve the transmission stability of crusher.
- crusher bearing with seal, in order to ensure the normal operation of the bearing
The cutting blade and gasket - independent
With high - strength alloy steel cutting blade and gasket, surface grinding and uniform hardening to the minimum 45-50HRC.
- cutting blade. Between the gasket and the axial gap is less than 0.65mm, to ensure the normal driving of the cutting blade, reduce wear, and increase the pressure pad.
L to ensure that the particle size of the blade tip height should not exceed 13 mm root diameter.
- crusher shaft, drive shaft and a drive shaft is made of high strength alloy steel, Quenched and tempered, meet the strength requirements.
Main technical parameters and dimensions
Model
PG-10
PG-12
PG-15
PG-20
PG-25
PG-30
Nanjing Sino German environmental protection equipment manufacturing Co., Ltd.
Address: Nanjing City Jinniu Lake District Liuhe Street Community Shuangqiao Xinguang Road No. 115
Contact: Xu Min (Manager) 18913960189
Fax: 025-57530868
Mailbox: njxm668@163.com
Q:121504062 Q