[introduction] basic installation of heat exchanger must meet in order to make no sink heat exchanger, or pipe the excessive deformation to the heat exchanger pipe. The foundation is generally divided into two types: one is the brick saddle, saddle for no heat exchanger and placed directly on the saddle on the basis of the heat exchanger and the foundation are not fixed, with the thermal expansion of the need to move freely. Another is the concrete foundation of the heat exchanger through the saddle support by anchor bolt and the base connected. In the installation should be strictly the basis for quality inspection and acceptance work of heat exchanger, the main projects are as follows: the surface of the base foundation elevation survey; plane position, shape and the main size and the reserved hole is in line with the actual requirements; the anchor bolt is in the right position, screw nut and washer is good or not, whether the place is complete; iron pad foundation surface is smooth.




















































Process equipment network finishing release, reproduced please indicate the source.