Community

litian 2019-05-22

Is the standard number on the pressure vessel drawing GB150 or GB/T150-2011?..

阳光boy 2019-05-20

Does the Writing Capacity Coefficient of Gas Tanks Other than Liquefied Gases..

wangliang 2019-05-15

Ask you, when calculating negative pressure, should the design temperature be 40 degrees, ..

The tube sheet of evaporator 2 0

光头强 2019-05-09

This is a tube plate of an evaporator. How much is left in the first half of the heat tran..

小鱼曾乖乖 2019-05-07

Has the new permission condition for pressure vessel manufacturing come out? In the future..

TuKai 2019-05-05

Heat exchanger tubesheet is not used as flange at the same time. How to ensure the paralle..

阳光boy 2019-04-26

Minimum design metal temperature.
What circumstances need to be considered..

Is NPS 1 "a 33.4 *2.77 or a 33.7 *2.77? 1 0

一路向东 2019-04-24

NPS1" is & phi; 33.4 & times; 2.77 or & phi; 33.7 & times; 2.77..

小鱼曾乖乖 2019-04-18

Would you like to know if the welding procedure qualification test pieces of spliced head ..

阳光boy 2019-04-15

The nozzle opening in the transition section of the head must be perpendicular to the head..