Community

Tower foundation template matching 1 0

Mrs.wu 2017-08-15

In the manufacture of tower, the base template is to drill the upper and lower template dr..

Under the baffle 1 0

糖心鸡蛋 2017-08-14

Is the baffle plate cut off after cutting the whole circle or cutting the material directl..

Conical head folding 1 0

八公山下 2017-08-14

Is the conical head in an atmospheric vessel necessarily bent?..

Stamping crown thinning 1 0

TuKai 2017-08-11

Does the spherical reduction stamping where can be found in the..

Leak hole design for lining equipment flange 1 0

是董小姐呀 2017-08-11

Hello, a piece of equipment, need to use CS equipment + liner flange, flange sealing surfa..

Ear seat setting 2 0

wangliang 2017-08-09

The vertical container is provided with 4 ear seats at the upper and the lower. Can this f..

Mixing equipment technology to 0 0

gr888 2017-08-09

What are the general technical requirements for mixing equipment?..

Plate size of titanium heat exchange tube 1 0

张公山寨 2017-08-08

The titanium heat exchange tube is 38mm in diameter. Can you tell me the size of the pipe ..

Atmospheric flat bottom tank design 1 0

Mrs.wu 2017-08-08

Ask a question, atmospheric flat bottomed cone storage tank, diameter 3600mm, height 10 me..

Flange parameter setting 1 0

啊呀呀 2017-08-07

Hello, I would like to ask, in calculating the flange, the thickness of the equipment flan..

Publish