Search
Sitemap
Chinese
Home Page
Register
Login
Home Page
Community Communications
Tech.
How to handle holes on the weld
How to handle holes on the weld
hao先生
A tower with a diameter of 2000, the nozzle and the internal parts, pre welding more, how to avoid the weld?
How to handle the opening on the weld
Share Gain Points!
Share to:
Weibo
WeChat
QQ
Facebook
linkedin
Twitter
Print
2017-04-29
Reply
光头强
In the process of setting the layout of the weld should be taken into account as much as possible to avoid taking over in the weld, the internal parts of the more, there may be no way to guarantee
2017-05-01 11:28:31
Reply
I Also Say a Word
×
Reply:
Publish
coco
If the nozzle is opened on the weld, it is necessary to weld the NDT, preferably 100%R
2017-05-03 13:21:53
Reply
I Also Say a Word
×
Reply:
Publish
Has Been A Member? Please
Login
Please Login First, and then Reply, Thank You.。
Hot Topics
Share the story and lead the cash
The whole welding of small U bend for fin heat exchanger..
Dissimilar steel welding qualification
Everybody, cylinder material Q345R...
Do you feel tired? That's because they don't manage
Tom
Dora
光头强
coco