Pressure vessel problem

The relationship between the two I give you one example: let's say a pair of heavy burden, 83kg, but you carry capacity is 100kg. Some provisions of the design pressure of not less than the maximum working pressure, if there is a safety device for safety valve, safety valve discharge pressure is higher than the maximum working pressure, but also higher than the maximum working pressure design pressure. Therefore, the general design of 1.1 times the maximum working pressure design pressure, which is the convention. Secondly, I estimate the designer is the selection of the American Standard, he used the flange class replacement design pressure, can be directly selected standard, and omit a lot of calculation process. And this is allowed. According to the specification and Quality Supervision Department of the relevant departments of the relevant departments, operating pressure is not higher than the maximum working pressure

The pressure of the pressure vessel is not only related to the diameter of the container, but also with the material, temperature, thickness and other factors.

Deformation is not the same. Other temporarily did not think, this is my QQ number: 2117288025, if you are in a hurry, you add me, I can help you find someone to ask