For users to call consulting, investment cost of briquette production problems, Tengda pressure ball machine factory staff, give a reasonable clear explanation, according to the processing capacity of briquette ball press machine is different, the price is not the same, pressure ball machine is divided into two kinds of mechanical and hydraulic, hydraulic type is more expensive, there is a brand manufacturer, type, size, and capacity leather are different, there are also some differences on the price. In addition, an important factor in the factory configuration of briquette production line is also decided to invest cost of briquette production.

Briquette ball machine production line equipment
The configuration of briquette pressure ball machine production line is used in crusher, mixer, molding machine (pressure ball machine), conveyor, and each type of equipment, quality and performance are likely to cause the price and cost of briquette production line. In general, briquette production line equipment are as follows:
1, special equipment coal crusher
Briquette ball machine production line used to roll crusher, hammer crusher, cage crusher, impact crusher, some power is too large, the size is too big, the dust is too large, is not conducive to environmental protection and coal quality requirements. Zhongzhou has been improved by practice. It is a vertical crusher, which reduces the power of the motor and ensures the particle size reduces the dust.
2, stirring briquette press molding machine in
Roll type mixer is often configured briquette production line, motor power, intermittent work pressure ball machine feeding is not uniform, there spherulization rate decrease. Dead parts prone to roll mixer in operation, easy to cause the coal quality is not stable. To solve these problems, the introduction of the Zhongzhou double shaft horizontal mixer has been absorbed and improved. After the configuration in the production line, due to the reduction of the motor power, making the material mixing evenly, and achieved good results.
3, briquette ball press machine in the production process
In the feed ingredients, etc., using quantitative device, flow meter and stepless speed regulation and other measures, the matching between devices has improved, the briquette production process has been controlled.
4, improve the coal ball pressure machine
According to the low pressure wet cold forming process and field practice of briquette ball press machine is improved, the molding pressure is adjusted, reduce the power allocation, change the forming roller material and heat treatment, improve the hardness and wear resistance.
5, drying machine improvement
General horizontal drying machine easily stuck, elongated, deviation phenomenon. Take appropriate measures to avoid jamming, stretch, deviation. In view of the phenomenon that the vertical drying machine is easy to be sticky, blocked and difficult to clean up, the corresponding improvement measures have been taken. At the same time, the population of the dryer is changed from the original open type to the closed type, which improves the thermal efficiency, saves energy and reduces the production cost.
6, binder preparation part
Over the years, due to different coal briquette binder has been unable to finalize the design, development and production of coal briquette technology is influenced by the type I, coal company also restricted by this, according to the materials, to the configuration of the type coal preparation equipment of powder binder (including grinder, milling machine, feeder and timing transportation equipment) preparation equipment and liquid binder (including heating device, box feeder, metering device and liquid pump and other equipment), to meet the requirements for the preparation of coal briquette binder.
7, electric control part
The design of automatic starting program of briquette line. Linkage, single action, overheating protection, automatic alarm device, to ensure the normal operation of the production line.
Tengda machinery, after years of research and Practice on the configuration of briquette production line equipment and some improvement, not only provides a cost-effective briquette production line, but also make various ancillary equipment to adapt to the needs of coal production.