Briquette ball machine, a driving shaft and a driven shaft through a gear to ensure the synchronous operation, the speed is too fast and too slow can't reach the forming requirements, resulting in briquette ball press machine equipment into the ball rate is not up to the standard or industry requirements, the user is a friend according to the key problems to be solved.

Tengda machinery, in the long-term production and the production of briquette ball press machine equipment process, summarizes the related technology or experience, the briquette ball press machine equipment into the ball rate causes is not up to the standard and the solution under details: in fact, in addition to speed coordination will cause the briquette ball press machine equipment into the ball rate not only is high, there is a look at whether there is a gap between the two roller ball machine equipment, if there is a gap between the two rollers, that is not directly out of raw materials by a pressing roller, so that the ball rate is almost 0. Then your roller ball is docking intact, two ball ball and socket to, if not completely opposite, but wrong, then you can press the ball, it would not be an ellipse, but 2.5 elliptic dislocation products, which directly affects the finished ball strength.
To find the causes of briquette ball press machine equipment into the ball was not up to standard, then we will have to line out. Is the most awful in the first case, the case shows that pressure ball machine manufacturers to you is defective, you can contact the manufacturer and customer service as a service to solve, which is any company would not happen!
For the second problem, your motor must meet the required speed.
For the third case, you will find your mechanic, the adjustment of the two roller bearings, to adjust the distance between the two bearings to almost zero situation. But do not affect the normal operation of the roller, if between two rollers is too heavy, the roller can not rotate, so that the machine does not work properly, not only will reduce the service life of the roller, but also will affect the normal production. Or adjust the roller bearing, but not between the roller bearing distance, but the two roller rotary bearings, must make the two roller ball on it, otherwise, there will be a ball not into a ball of rupture.
Gongyi city Tengda machinery factory production of briquette professional pressure ball machine, powder / powder, fluorite powder pressure ball machine pressure ball machine, pressure ball machine, gypsum slurry pressure ball machine energy-saving equipment, our factory in the development of science and technology research and production process of alloy roller, precision casting process using a forming material, using nickel, chromium, manganese, molybdenum, titanium and other alloy material with high strength and good toughness, good wear resistance, and other characteristics, is the most assured briquette ball press machine equipment.