Pyler's customer service business scope:
Our maintenance philosophy is to provide individual parts during the replacement process. These parts are all reprocessed and tested, and can be used for installation and use immediately.

We provide the following services:
& Middot; Make repair plans separately according to customer needs and prepare all required parts in advance
& Middot; Remove old parts
& Middot; Install new components
& Middot; Re-debug the machine
& Middot; Provide parts purchase suggestions according to customer's actual needs
& Middot; Six months'warranty for parts and services purchased
& Middot; Competitive professional services
Customer revenue
& Middot; Rapid replacement of components in preventive maintenance tasks
& Middot; Effectiveness of equipment can be achieved by using authentic accessories (original equipment manufacturer)
& Middot; Reduce planned or unplanned downtime
& Middot; Cost reduction
Basic concepts and advantages of mechanical seals:
(1) Seals are reliable in long-term operation, the sealing state is very stable, and the leakage is very small. According to rough statistics, the leakage is generally only 1/100 of the soft packing seal.
(2) The service life in oil and water medium can generally reach 1-2 years or longer, and in chemical medium it can usually reach more than half a year.
(3) Friction power consumption of small mechanical seals is only 10%-50% of that of soft packing seals.
(4) Shaft or sleeve is basically free from friction;
_Long maintenance period can be automatically compensated after wear and tear of the end face. Normally, there is no need for regular maintenance.
_Good vibration resistance is insensitive to the vibration and deflection of the rotating shaft and the deflection of the shaft to the sealing chamber.
_Mechanical seals with wide application range can be used for sealing at low temperature, high temperature, vacuum, high pressure, different rotational speeds, as well as various corrosive and abrasive media.
_For many factories nowadays, & ldquo; zero leakage & rdquo; need, root can not meet this requirement; radically adapt to a wide range, more arbitrary, but for factories, frequent replacement or maintenance will cause great losses to factories.
But its shortcomings are:
(1) The structure is complex and the requirements for manufacturing and processing are high.
(2) Installation and replacement are more troublesome, and workers are required to have a certain level of installation technology;
(3) When accidental accidents occur, it is difficult to deal with them.
(4) High one-time investment.