Do you think it's safe to be safe? Take a look at the picture below, to find out all the security risks, it is really understand the security!

Safety visual management
1, wear a helmet is not standardized, not fasten the safety cap strip
2, spray paint female hair must be set into the safety helmet, must bring masks
3, clothing must meet the standards
4, all the staff did not wear the factory license

5, compressed gas cylinders without status label
6 color, various cylinders conform to the standard (oxygen bottle blue, black, white, red acetylene, hydrogen bottle green, the scarlet letter, liquefied gas silver, the scarlet letter etc.)
7, oxygen, acetylene bottle is too close, not less than 5 meters
8, oxygen bottles, with the gas cylinders are not equipped with anti dumping facilities
9, the cylinder is not configured complete anticollision ring and a detachable cap

Two, did not set the isolation region
The 1, if possible in the workplace, we must use the ropes (safety fence or special isolation belt) isolated in different regions, such as the maintenance work area, the contractor working area, temporary goods storage areas, regional walkways and other dangerous areas, and tagged to clear separation of relevant information
2, the pedestrian or vehicle traffic safety risk (risk) of any location or operating area, such as the pit, there is something falling high, high temperature, corrosive liquid splash and leakage places, etc.
3, maintenance work is dangerous
4, construction, high-risk operations, such as the occurrence of accidents

Three, lifting operation
1, the use of bridge crane, gantry crane, tower crane, crane, hoist and other lifting equipment for the job
2. It is prohibited to work, pass or stand under the suspended cargo.
3, no safety pin and hook tongue
4, lifting only a wire rope, lifting objects easily fall
5, the main body of the goods must be fixed
6, goods of different lengths, the center of gravity of the goods is not stable, it is suggested that the length of the lifting of the lifting of the length of the goods in batches.
Four, fire safety
1, debris blocking fire channel
2, debris blocking safety channel
3, cart blocking construction channel
4, box type fire hydrant can not be landed, should be 1.1 meters from the ground, easy to operate
5, the safety door should be used to facilitate the opening of the door pin device
6, non emergency, do not run
7, stacked items are too high, irregular, there is a risk of collapse

Five, general security
1, the top of the cabinet should not be stacked materials and items
2, items should be stored orderly, store items should follow “ low weight high ” the principle of high cabinet for easy handling
3, channel flat plate
4, the use of a reasonable way and posture to carry heavy
5, glass breakage should be repaired in time
6, the location of the fire extinguisher is occupied by the electric welding machine

Six, high work
1, the height of the work is in the fall of the height of the base 2m above (including 2m) position to carry out the operation
2, the lack of a high altitude operations guardian, lack of safety warning signs
3, high operating personnel must fasten the safety belt, wear safety helmets, clothing should be flexible, prohibit wearing slippery shoes with nails, all part of the safety belt can not be removed
4, high altitude operation is strictly prohibited throwing tools, materials and debris, etc.
5, there is no security platform fence; security platform is not installed protection network

Seven, the use of the relevant requirements of the ladder
1, straight ladders and extension ladders should extend the lap point 1 meters
2, straight ladder or extend the gradient of the ladder to 70 - 60 degrees is appropriate, the ladder should be non slip cover, and place a firm, level, especially in the ground more slippery case
3, work on the ladder and ladder from the hands and feet from the ground more than 2 meters high, should fasten the safety belt.
4, in the easy slip deviation of the component on the ladder, the ladder on the top of the upper end of the rope tied to the top of the firm, if the ladder is not fixed, there must be someone under the ladder. Keep off the work at the top of a ladder, with straight ladder feet from the top of the ladder shall not be less than four, with a ladder and shall not be less than two, the ladder height as more than 6m, should be provided to support reinforcement in the middle

Eight, hot work
1, no hot work (welding, polishing) Guardian
2, the welder should be placed in the fire isolation area
3, the left hand holding the welding operation special goggles equipped with special equipment, welding helmet
4, welding gun circuit should be clamped on the workpiece
5, grinding operations should be equipped with special protective equipment
6, grinding operation should wear special gloves
7, hot work must be equipped with a fire extinguisher

Nine, temporary electricity
1, mobile tools, hand tools and other electrical equipment due to the respective power switch, must implement the “ a machine brake system, ” prohibit the use of the same electrical switch directly control two or more than two electrical equipment (including socket)
2, in the need to cross the road or a heavy load of dangerous road, the need to wear a corresponding line of hard pipe protection, the hard pipe must be fixed
3, when the area is located in the busy traffic or heavy equipment through the area, the application of concrete to protect them, and set the safety warning signs
4, the cable will be polished to the spark damaged
5, welding line cross

Ten, other
Spray coating, welding, polishing cross operation, shall be effective to separate from