In July 23rd, around 10 hours, the fire brigade of the eastern Pingxiang fire brigade suddenly rang, followed by a fire alarm command from the 119 command center of the team: the Pingxiang iron and steel plant of the east of Pingxiang was fired at the Pingxiang iron and steel plant.
After receiving the command of the fire brigade command center, the fire brigade in eastern Pingxiang immediately dispatched 4 fire engines and 18 officers went to the scene of the fire. The leader of the eastern Hunan brigade on duty, Liu Haihua, the captain of the big team, went out and went to the scene with the sound of the intense fire alarm. During the period, the commander, through inquiring the alarm, had a preliminary understanding of the situation of fire in the field, the burning material and whether there were people trapped and injured. At the same time, the chief captain Liu Haihua immediately coordinated the dispatch of the emergency linkages of the fire brigade and the sanitation sprinkler to the scene.



When the fire truck rushed to the scene, it was far away to see that smoke was thick over the area of Pinggang. At 10:16, the gorge of the gorge arrived at the scene, and there was smoke billowing and flames billowing. The fire desulphurization tower is the dismantled desulphurization tower which is being dismantled. The main material of the desulphurization tower is glass steel, and the glass fiber reinforced plastic is mainly made of resin and glass fiber. During the inquiry period, the tower of the desulfurization tower collapsed suddenly due to the high temperature, which caused a great deal of urgency. In order to prevent the collapse of high temperature, the squadron of gorge Yamaguchi immediately set up a water gun position on the side of the desulfurization tower to suppress the fire, and a water gun was produced on the other side to cool the tank.
At 10:47, Tang Xuelin, deputy governor of Xiangdong District, arrived at the scene of the fire to conduct the command. At 10:49, the joint force of the sanitation sprinkler and the duty fire brigade of the wooden horse village arrived at the scene. The sprinkler was responsible for the water supply to the main chariot, and the fire brigade in the village of Ma Ma Village added a water gun to prevent the spread of the fire. 11 hours and 09 minutes, Chaoyang Road Squadron, secret service squadron reinforcements arrived at the scene, immediately set up a water gun position, the fire will be combating. At 11:57, the fire was successfully extinguished, after a period of field monitoring, waiting for the factory technicians to deal with the fire, 17 hours and 05 points to determine the danger of no reignition, gorge Yamaguchi road squadron orderly return to construction.
Safety operation rules for fire operation
1, the fire operation must comply with the relevant state laws and regulations and standard requirements, comply with the company's related safety production management system and operating regulations; the welding and cutting workers must have welder card, special operator's operation certificate!
2. Before the fire operation, the operator must confirm the safety of the field, clear the possible or potential spatter areas of high temperature slag, Mars and other fire, and no combustible products (chemicals, cartons, plastics, wood and other combustibles) within the range of 10 meters around the area to ensure that the fire area is kept clean and non flammable. Combustible products.
3. The operator must effectively isolate and isolate the fire zone from the external area, the fire type and the equipment needed to protect the equipment and tools when the unconditionally removed flammable products and the fire may affect or damage the equipment and tools that are unconditionally removed. If necessary, the water can be soaked on the spot.
4, before the high fire operation, the operator must identify the possible or potentially falling areas of the fire, clear the surrounding environment to place combustible flammable products, confirm and clean up the scene according to the regulations, fire and explosion caused by fire spatter, and stop the operation at the 5 level with high wind when outdoor fire operation is carried out.
5. All kinds of chemicals, such as oil, paint thinner, combustible gas, other combustible medium, toxic medium and other chemicals, such as containers, equipment and pipes with pressure and high temperature, are strictly forbidden to fire blindly, all the movable fire will not move, and the dismantling will be removed to the safe place. To ensure that the containers, equipment and pipes are at normal temperature and normal pressure, by cutting off, adding the required blind plate and other measures to ensure the complete isolation of the equipment or pipes from the production system, it is necessary to check and analyze the chemical properties and surrounding environment of the containers, equipment, pipes, and the use of air and inert gas before firing. After full blowing, cleaning and replacement of the body (nitrogen, argon, etc.), water vapor, water and so on, after repeated confirmation of no dangerous hidden danger, the fire operation belongs to a class a. It is necessary to handle the fire operation license and send people to supervise fire. If necessary, the water can be soaked on the spot.
6, when using gas welding to cut fire operation, the distance between oxygen bottle and acetylene and propane gas cylinder is not less than 5 meters. The two and the firing operation point must keep the safe distance of not less than 10 meters. The gas bottle is strictly prohibited under the sunlight. The oxygen bottle mouth and the pressure relief valve and valve should not be stained with oil and oil. The acetylene bottle is strictly forbidden to lie lying lying and laying; transportation, storage, storage, When using gas cylinders, no collision, percussion and drastic rolling are prohibited. Cylinders must be placed firmly to prevent cylinders from dumping.
7, before the fire operation, the electric welding machine, gas cylinder (pressure relief valve, hose, cutting torch, etc.), grinding wheel, dressing tool, cable line and cutting machine should be checked to ensure the unsafety factors such as no breakage, leakage, clamping and tugging of the wires in good condition; the ground wire of the electric welding machine should be directly attached to the welding parts and can not be disorderly connected. Poor contact, fever and fire cause fire or electric leakage to cause casualties.
8, after the completion of the fire operation, the operator must confirm the safety of the surrounding site, straighten out the scene, and leave the scene without any fire hazard.
-END-